Why is INSULISO COATING used?
IINSULISO is a water-based product to save energy. In summer to keep the heat inside and in winter to keep the cold outside. INSULISO provides excellent thermal protection in northern areas with colder climate (and there also during occasional hot summers) and to significantly reduce the temperature inside buildings and houses in warm (tropical or subtropical) areas. It can be used on vertical as well as horizontal surfaces, i.e. on walls, roofs,… INSULISO has perfect expansion coefficients in the event of sudden changes in temperature, thus preventing the formation of small cracks, thus maximising thermal insulation properties. With Insuliso it is easy to make a 12 degree difference in temperature inside versus outside!
INSULISO COATING application method: painting-brush, roller or high-pressure gun.
Thinner and cleaning utensils: Water.
The surfaces to be painted must first be cleaned.
Surfaces must be completely dry and clean of dust, rust, grease… and primed properly.
Insuliso coating can be used on
CONCRETE – BRICK – MORTAR – CEMENT – FIBER CEMENT – CORRUGATED SHEETS
ROOF TILES – ALUMINUM – ZINC – GALVANISE – STEEL – OTHER METALS
GLASS – FAIENCES – CERAMIC – TILES – FLOORS
PLASTIC – PVC – OTHER PLASTICS
Packaging: Plastic pot 4 litres or plastic bucket 15 litres
Storage: With INSULISO we guarantee storage for up to 24 months in original unopened packaging. Can be stored at temperatures from 5° to 35° and in weatherproof rooms. It is also strongly recommended to store in rooms where the temperature does not fluctuate too abruptly.
Base: INSULISO COATING is water-based for vertical and horizontal surfaces, with excellent properties such as thermal insulation and anti-condensation, resulting in significant energy savings.
- Thermal insulation
- Excellent adhesion
- Perfect elasticity
- Resistant to thunderstorms, light and sun
- Little water absorption
- Easy to level and brush
- Resistant to alkalis and weather influences
- Stable pigments resistant to sun
- Waterproof and water-repellent
Product: Copolymer acrylic
Color: White / Cream / Grey / On order
Gloss: 60º: 2-3 GU (UNE EN ISO 2813)
Weight of solids: 58 % (UNE EN ISO 3251)
Solids by volume: 62 % (UNE 48090)
Viscosity: 100 – 106 KU (23 + 2 ºC) (UNE 48076)
Specific garvity: 0.80 – 0.90 Kg./l (23 + 2 ºC) (UNE EN ISO 2811-1)
pH: 8.0 – 10.0 (23 + 2 ºC) (UNE EN ISO 787-9)
Theoretical returns: (0,2-0,6 Kg/m2) (0,250-0,750)
(taking irregularities into account)
Drying time: 1 hour (UNE 48301)
Paintable after: 12 – 24 hours
Reaction in case of fire: Class M-1 (UNE 23727)
Reaction in case of fire: Bs1d0 (UNE EN 13501-1:2007)
Resistance to attack: Class 1 (< 5 m à 200 rub UNE-EN ISO 11998) (UNE EN 13300)
Water vapour permeability: Class II (Mid) (UNE EN ISO 7783-2)
Transmission speed of water: Class III (Small) (UNE EN 1062-3)
EU-LIMIT VALUE (cat. A / c): 40 g / l (2010). Max. content VOC: 5 g / l
Ceramic tile without trying
Ceramic tile trying
These values are for a consumption of 0,6 kg / m². (0,2-0,6 kg / m2) (0,250-0,750 liter / m²)
Index SRI according ASTM E1980-11
«Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces».
|Solar refflection (%)||84,8 ± 0,2||ASTM E903-12|
|Emissivity||0,82 ± 0,03||ASTM C1371-15|
Coëfficient of convection
|Low (0-2 m/s)||104,7 ± 0,3||319,3 (46.15 ºC)|
|Center (2-6 m/s)||105,2 ± 0,3||315,8 (42.65 ºC)|
|High (6-10 m/s)||105,6 ± 0,3||312,7 (39.55 ºC)|
Ts (K): Surface temperature in degrees Kelvin. SRI: Solar reflectance index
The product reduces thermal conductivity by at least 20%. With INSULISO an energy saving of at least 20% is achieved!
All of the above information serves as a guide for the user without any additional warranty or connections.
Please refer to the data sheet for more information on the environment.